2018 Land Pride FPS48

Call for Price

Land Pride



Land Pride's FPS Food Plot Seeder is a highly versatile full component package designed to open and break up soil surfaces by discing the soil for seedbed or planting preparation. It will then spread the seeds while simultaneously pressing the seeds into full soil contact with a trailing fluted roller/packer. It can also be used to spread fertilizer, lime, gypsum and other soil conditioning amendments at distances ranging from 4 ft. to 20 ft. The spin spreader can also be used in the off-season to spread sand or salt for winter icing or slick snow conditions.

The Food Plot Seeder is a pull-type implement designed to be pulled behind sub-compact and compact utility tractors, off-road utility vehicles and ATVs. This system can be easily raised out of working position and onto transport wheels either manually or with a 12 volt lift system. The combination of maximum versatility and narrow transport width makes the FPS an excellent choice for applications in wild game food plots, hunting clubs and resorts, ranches, farms, game preserves, landscaping, hobby farming, small nurseries, and gardens.

  • Weight: 510 lbs. Heavy construction helps penetrate ground.
  • 2" Square frame tube: Frame tubing is stronger than angle iron.
  • Adjustable gang angles: Cutting aggressiveness can be adjusted on the front and rear up to 21 degrees.
  • 3" x 2" Gang tube, 1" sq. gang axles, high carbon steel: high carbon square axles offer great strength in punishing conditions.
  • 16" Notched disc blades: Notched blades for aggressive digging and cutting action.
  • 3/8” Thick bearing hangers: Heavy-duty hangers resist the high torque from U-bolts.
  • Self aligning sealed bearings: Self-aligning bearings offer long life while pounding through hard ground.
  • Rear Roller: 40 7/16" Packing width, Pivots for storage without taking spreader off unit.
  • Spin Spreader Deflector: Allows to reduce seed dispersion width down to 48"
  • Seed hopper height: Loading height (42") for easy of use.
  • Spin Spreader Restrictor Plate: Allows smaller seed to be run through the spreader at a lower volume per acre.
  • Hitch Type: Pull type with optional 2" ball hitch or clevis hitch
  • Base Unit Weight: 370 lbs.
  • Base Unit Weight: 510 lbs. (With Spin Spreader and roller.)
  • Hitch Weight: 170 lbs. (In transport position with roller up and 100 lbs in Spin Spreader hopper.)
  • Hitch Height with Tongue Level: Adjustable from 15 1/2" to 31" with wheels in transport position. Adjustable from 9 5/8" to 21 3/4" with discs sitting on the ground.
  • Disc Cutting Width: 40" to 50"
  • Minimum ATV Size: 350 cc
  • Minimum Tractor/vehicle Size: 17 hp
  • Height: 52"
  • Length: 104"
  • Width: 54"
  • Weight Load on Each Disc: 46 lbs.
  • Number of Disc Blades: 8
  • Disc Blade Size & Type: 16" Notched
  • Blade Spacing: 7 1/2"
  • Transport / Gauging Tires: 13" Diameter 4 ply tubeless
  • Bearing Hanger: 3/8" Plate
  • Bearing Type, 2 per Gang: Self Aligning, Sealed Bearing
  • Gang Tube: 3" x 2"
  • Gang Axle: 1" Square high carbon steel
  • Disc Angle: Front Gang: 0, 7, 14 & 21 degrees; Rear Gang: 0, 7, 14 & 21 degrees
  • Frame Construction: 2" x 2" Square tubular design
  • Lifting Device: Ratchet Jack or 12 volt Linear Actuator
  • 12 Volt Actuator Amperage: 34 amps at startup. 28 amps during normal operation.
  • Rear Axle pivot Type: Greasable
  • Rear Roller Bearing: Greasable
Optional Spin Spreader and Packer
  • Packer Roller Width: 40 7/16"
  • Spreading Device: Spin Spreader, 12V
  • Spreader Hopper Loading Height: 42" off ground
  • Spin Spreader Volume/Capacity: 2 cu. ft. (15 gallons) (100 lbs. Maximum capacity weight)
  • Wide Spread Pattern Without Deflector: 20 to 25 ft. (Actual spread pattern is dependent upon product type and condition during application.)
  • Spin Spreader Deflector: Diverts seed to smaller spreading width. Seed rate tables calculated at 48", 60" & 72"
  • Small Seed Restrictor: Restricts small seed for smaller distribution levels.
  • Spin Spreader Electrical: Fuse Rating: 15 AMPS maximum
  • Spin Spreader Electrical: Start-Up Amps: 4 Amps (Spreading Material)
  • Spin Spreader Electrical: Normal Operating Amps: .5 Amps (Spreading material)



54 in.
Hopper Capacity
Optional Spin Spreader: 2 cu. ft. (15 gal.); 100 lb.
370 lb.; 510 lb. with Optional Spin Spreader and Roller
Recommended HP
17 hp